-
製作編
OpenCVとラズパイを使った顔認証・顔識別/2024
ラズパイとOpenCVを使った顔認証・顔識別/2024 2024-05月実施。 opencvも顔認証も特別興味なかったのですが、「これ、組み合わせてみたら面白いんじゃないか?」とeyeskit 製作の思い付きで何が何でもやってみたくなりました。 しかしあらゆるサイト... -
製作編
ロボットの目の研究としてAdafruit Animated Eyes Bonnet for Raspberry Pi Pack – Pi not included 購入
ロボットの目の研究として Adafruit Animated Eyes Bonnet for Raspberry Pi Pack - Pi not included 購入 よく液晶ディスプレイを使ってロボットの目の表現されている方が見られます。 すごく印象的で以前から興味があったので、製作されている方... -
petoi bittle
PetoiをPCとBluetooth接続
PetoiをPCとBluetooth接続Arduino IDEも使いだしたし、カメラも繋いだ。でも動作させるには置き場所がちょっと狭い・・USB接続のシリアルモードでコマンド試しているうちに歩行コマンドだったりしていきなり歩き出してあわわ!なんてなったり。メカ... -
petoi bittle
PetoiのMUカメラ取付意外と簡単だった
PetoiのMUカメラ取付意外と簡単だったPetoiの購入時にオプションとしてMUカメラも合わせて買っていましたが、セットアップは難しいのではないか?と後回しにしてましたが、いつまでもそういう訳にもいかないので取り組んでみました。やってみたら意... -
petoi bittle
メカキュウべえ(petoiをキュウべえにしてみた)
メカキュウべえ(petoiをキュウべえにしてみた)メカキュウべえ向学の為に買ったpetoiですが、petoi単体でも十分魅力的だったのですが、購入前から遊び心も加えてみたい(何かのキャラにしてみよう)と思ってました。ロボットってどうしてもマニアッ... -
petoi bittle
Petoiを Arduino IDEでセットアップし直し
Petoiを Arduino IDEでセットアップし直しPetoiキュウベエですが、外形やフレームの見直しと合わせて、PCでのセットアップをやり直しです。最初にセットアップの際にデスクトップアプリの使用とArduino IDEの選択があり、簡単なデスクトップアプリの... -
3Dプリンタ
初めてのABS 泥沼への沈み、そして脱却(Anycubic MEGA X)
初めてのABS 泥沼への沈み、そして脱却(Anycubic MEGA X)eSUN ABS フィラメント3Dプリンタを購入してから2年たってますが、難しいと聞いていたので実はまだ一度もABSを使ったことがなかったりします。既にツイッターやインスタでは公表しているキュウ... -
petoi bittle
Petoi BITTLE を試す2 キャリブレーション
Petoi BITTLE を試す2 キャリブレーション前回まででファーム(基本プログラム)を書き込み、いよいよキャリブレーション(動作の調整)です。これを調整しとかないと、車を例にすればアクセル踏んでもいないのにスロットロル全開!なんてこともあり... -
petoi bittle
Petoi BITTLE (4足歩行ロボキット)を試す
Petoi BTTLE(4足歩行ロボキット)を試す。Petoi BITTLE パッケージPetoi BITTLE(4足歩行ロボキット)というのを購入してみました。でも実はこれ2021年前半くらいからクラウドファンディングで募集されていたキットでTVでも放映されていたみたいで既... -
透過型ディスプレイ
透過型ディスプレイを自作してプラモの背景を作る!②
透過型ディスプレイを自作してプラモの背景を作る!②前回で取り合えず透過して映ることは確認しましたが、液晶パネル本体、枠、偏光版、LEDバーと全てがバラバラで立てかけてるだけだったので、調整が出来ませんでした。このままではとても使えない... -
透過型ディスプレイ
透過型ディスプレイを自作してプラモの背景を作る!①
透過型ディスプレイを自作してプラモの背景を作る!①透過ディスプレイ、自作テストガンプラ(ケンプファーアメイジング)製作中ですが、これ背景に透過型ディスプレイを使ったら映えるんじゃない?って思ったら、やってみたくてやってみたくて仕方な... -
プラモデル
ケンプファーアメイジング 出撃する!1
ケンプファーアメイジング 出撃する!1 KAMPFER AMAZING SORTIE!11カタパルト作成編ケンプファーアメイジング (素組み)ガンダムビルドファイターズ、大好きなアニメなんですが中でもケンプファーアメイジング、超超好きです。主人公のライバル... -
製作編
人面蜘蛛(鬼滅の刃)制作編
人面蜘蛛(鬼滅の刃)制作編人面蜘蛛(途中)スライムラジコンで使ったラジコンキット(京商 iRecever。但し現在は販売終了)ですが、スライムに拘らず、このキットだけでもアイデア一つで何でもつくれそうです。(※iReceverは現在販売終了ですが、... -
スライムラジコン
爆走!スライムラジコン製作記4 冒険編
爆走!スライムラジコン製作記4 冒険編やっとできたスライムラジコン、さっそく外で走らせたいといったところだったのですが、中々時間が取れませんでした。ある日、森を散歩していたら前からスライムが!ある日、街をあるいていたら前からスライム... -
ST-DRONE
ST-DRONE 製作記2(修正)
ST-DRONE製作記2(修正)ST-DRONE確認(2020/08/15)前回で購入・組み立てした、STEVAL-DRONE01をiphoneで利用ですが、垂直に高度上昇しません・・・飛ぶことは飛びますが、10㎝程度でそのまま進んでいく、そして屋内なのでぶつかりひっくり返り緊急... -
ST-DRONE
ST-DRONE 製作記1(組み立て)
ST-DRONE製作記1(組み立て)ST-DRONE組み立て執筆時202007月、ずっと置きっぱなしになっていましたが雑誌インターフェースの202003月版のドローン制御の冊子と、インターフェース202003月号その中で紹介されているドローンキット(STEVAL-DRONE01)を購入... -
スライムラジコン
爆走!スライムラジコン製作記3(自作ラジコン) 製作編
爆走!スライムラジコン製作記3 製作編ラジコンを動作させる部品と3Dプリンタを基にパーツを準備し、実製作に入って行きましたが、理論と実践はちがうもの(知識不足なだけだろうけど)当初の製作予定からは大きく変更を余儀なくされました。ここは分かり... -
スライムラジコン
爆走!スライムラジコン製作記2(自作ラジコン) 3Dプリント編
爆走!スライムラジコン製作記2 3Dプリント編2 印刷編前回執筆の3Dプリンタ設定→サンプル印刷後、今回はオリジナル印刷となります。印刷データとしてSDカードに最初から入っているフクロウデータと違い。FUSION360のCADデータを3Dプリントデータとし... -
スライムラジコン
爆走!スライムラジコン製作1(自作ラジコン) アイデア編
爆走!スライムラジコン製作記1 アイデア編3Dプリンタも買ったことだし、いよいよ早速実製作へ。スライムラジコン作りたい物はいっぱいありますが、時間も予算も限られているので(特に生活に時間が全然ない・・)きちんと作るのが大事とは十分承知して... -
なんちゃってA106
なんちゃってA106 制作記10 動作テスト
アトム・ザ・ビギニング なんちゃってA106制作記10動作テスト先の投稿でも記述しましたが、ブログそのものをしばらくお休みしてました。私生活がなんだかんだ忙しかったっていうのもありましたが。製作が行き詰まったっていうのもあります。なんだか最近...
12